Ford F-150 2018 Owner's Manual page 138

Message
Hill Descent Driver Resume
Control
Hill Descent Control Fault
Hill Descent Control Off System
Cooling
Hill Descent Control Ready
Park Aid
Message
Check Front Park Aid
Check Rear Park Aid
Front Park Aid On Off
Rear Park Aid On Off
Park Brake
Message
To Release: Press Brake
and Switch
Park Brake Use Switch
to Release
Release Park Brake
Park Brake Not Applied
Park Brake Not Released
F-150 (TFC) Canada/United States of America, enUSA, Edition date: 201709, Second Printing
Information Displays
Hill descent control mode is deactivated and you must
A hill descent system fault is present.
The hill descent system is cooling due to overuse.
The hill descent control system is ready.
The system has detected a condition that requires service.
Contact an authorized dealer. See Principle of Operation
The system has detected a condition that requires service.
Contact an authorized dealer. See Principle of Operation
Displays the park aid status.
Displays the park aid status.
The electric parking brake is set and a manual release is
attempted without the brake pedal being pressed.
The electric park brake is set and an automatic release is
attempted but cannot be performed. Perform a manual
The electric park brake is set and your vehicle speed exceeds
3 mph (5 km/h). Release park brake before continued driving.
The electric park brake is not fully applied.
The electric park brake is not fully released.
135
Action
resume control.
Action
(page 232).
(page 232).
Action
release.