Advertisement
Mounting Devices
Door/Window Contact
1. The sensor should be on the frame while the magnet should be on the door/window.
Testing
The gap between the magnet and sensor should
be no more than 10mm when closed. Test to see
whether the magnet is in range of the sensor: before
mounting hold the magnet and sensor in place and
then pull them apart. If the sensor LED lights up it
implies the two items are within range.
Clean the mounting surface with a suitable degreaser agent and mount using the adhesive pads
Please note that some surfaces may be unsuitable for mounting using the adhesive pads. Please use
screwmounting in these cases.
5
6
14
•
b
a
(14)
(GB) Installation - (IT) Installazione - (DE) Installation - (NO) Installa
(DK) Installation.
7
1
3
5
or
6
b
7
2
4
max 10mm
or
7
a
a
Hide quick links:
Advertisement
