Yale SR-310 Manual page 24

Adding & Using Devices
atterie - (DE) Batteriewechsel - (NO) Batteribytte -
Reset Key Pad Code
Reset to factory default (0000) using the following steps:
1. Unscrew
CHANGE
BATTERY
SR-KP
3. Hold down number 3 at the same time as inserting
the new battery.
CR 2032
SR-DC
5. Initiliase your Key Pad. See previous page 9.
6. Learn this into your system.
CR 2032
Disarmed
Part Armed
SR-PC
Armed
2 x 1.5v AA
Using your Panic Alarm
• Press the panic buttons together for 3 seconds to activate
the alarm.
• Deactivate a panic event by pressing the disarm button
followed by your PIN code.
SR-PIR / PETPIR
If there is a system fault, you will need to press the Arm/
Home Arm button for a second time to "force arm" the
system.
3 x 1.5v AAA
24
•
2. Remove
4. Replace cover
+
+
PIN CODE
PIN CODE
+
PIN CODE
CHANGE
BATTERY
CR 2032
CR 2032
2 x 1.5v AA
Panic button
Panic button
>3sec.<
>3sec.<
Press the 2 panic buttons together for
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.
3 seconds to activate a panic alarm.
3 x 1.5v AAA
Panic button
>3sec.<
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.