Panasonic HC-W580 Basic Owner's Manual page 186

∫ When configuring the home monitor settings using QR code
≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Wireless Settings] in [Wi-Fi
Setup] (l 161 to 164).
1
Press Wi-Fi button on this unit.
2
Touch [Home Cam] on the Wi-Fi menu screen.
3
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
4
Turn off the Wi-Fi setting of the smartphone.
5
Start up the smartphone application "Image App".
≥ (If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [No].
≥ (If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, select [Close].
6
Enable the home monitoring setting from the menu of the smartphone
application "Image App".
(MENU)] # [Application function] # [Home Monitor], and enable [Use Home Monitor].
≥ Select [
7
Select [Set connect. dest.] of the smartphone.
8
On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
≥ The Device ID and Password will be set. Select [OK] (on your Android device) or [Complete] (on
your iOS device).
9
Touch [NEXT] on the screen of this unit.
≥ Check that the message "Connecting..." has disappeared from this unit.
10
On the smartphone, select [Start Home Monitor] to start home monitoring.
To exit [Home Cam]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
When using the home monitor function for the second time or later
1
Press Wi-Fi button on this unit and touch [Home Cam].
2
Start up the smartphone application "Image App".
≥ When a Wi-Fi connection guidance screen is displayed, select [NO].
≥ Use the smartphone to start home monitor.
To exit [Home Cam]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
≥ The message is displayed. Touch [YES] to close the indication.
- 142 -