Searching For Wireless Access Points To Set Up A Connection - Panasonic HC-W580 Basic Owner's Manual

Enter a PIN code to set the Wi-Fi connection
1 Touch [PIN code] in Step 6.
2 Touch the wireless access point to be connected.
≥ If you touch [Refresh], you can search for wireless access points again.
≥ If you touch and select a wireless access point, all characters will be displayed. In this case,
touch [ENTER].
3 Enter the PIN code displayed on this unit screen into the wireless access
point.
≥ For further details, please read the operating instructions for the wireless access point. (When
using a tethering connection, please read the operating instructions for the smartphone.)
4 Touch [NEXT].
≥ A message is displayed when the connection is complete. Touch [ENTER], and exit [Wireless
Settings].
≥ A message is displayed when the connection attempt fails. Touch [ENTER], and set the
connection again.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j

Searching for wireless access points to set up a connection

≥ Confirm Encryption key (Password) of the selected wireless access point if the network
authentication is encrypted.
1
Press Wi-Fi button on this unit.
2
Touch [Wi-Fi Setup].
3
Touch [Wireless Settings].
4
Touch the part with no display of a wireless
access point C.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Wireless Settings] on page 170.
5
Touch [Search for wireless network].
- 162 -
  
A [Delete]
B [ENTER]
