Panasonic HC-W580 Basic Owner's Manual page 263

Problem
Cannot copy scenes on
the SD card by connecting
to other equipment with
the USB cable.
Problem
When connected by the
USB cable, this unit is not
detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
Cannot see the PDF
operating instructions for
HD Writer LE 3.1.
Problem
Cannot connect to
wireless access point or
smartphone.
Cannot operate from
smartphone using [Link to
Cell].
When I look at the
recording screen with the
smartphone, mosaic-like
noise appears on the
screen and the image
movement does not look
smooth.
Cannot use [DLNA Play].
With other products
≥ Other equipment might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
With a PC
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment.
≥ Connect the supplied USB cable again after restarting the PC
and turning on this unit again.
≥ To disconnect the USB cable safely, select the
task tray displayed on the PC, and then select the model
number of this unit to disconnect the USB cable.
≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions for
HD Writer LE 3.1.
About the Wi-Fi function
≥ Read page 168 if the Wi-Fi connection cannot be established.
≥ Install the smartphone app "Image App" on your smartphone.
(l 158)
≥ If you set [REC MODE] to AVCHD [1080/60p] or MP4/iFrame
[1080/50M]/[1080/28M] in Motion Picture Recording Mode,
mosaic-like noise may appear on the screen and the image
movement may not look smooth. (These will not affect the
recorded image.)
≥ Make sure the television is compatible with DLNA. Read the
instructions for the television you are using.
≥ Make sure the wireless access point and this device are
properly connected.
≥ Approach the wireless access point and reconnect.
≥ If a connection cannot be made between this device and a
DLNA-compatible device, try to reconnect and make sure
they connect properly.
- 219 -
Check points
Check points
(l 203, 210)
Check points
icon in