Back Panel Buttons; Simplified Eu Declaration Of Conformity; Weee Directive Compliance; Technical Data - FIBARO Home Center 2 Manual

Back panel buttons

POWER
• click to turn HC2 ON
• click (when HC2 ON) to reset the device
• press and hold for approx 10 seconds to
turn HC2 OFF
RECOVERY
• Disconnect the power supply. Press
and hold
reconnecting the power supply (release
the button after entering Recovery
Mode)*.
• click once - entering Learn Mode (add
new Z-Wave device),
• click twice - entering Learn Mode (delete
Z-Wave device),
• press and
IP: 192.168.81.1*
*Note: after setting static IP Home Center 2
will loose the router connection.

Simplified EU declaration of conformity

Hereby, Fibar Group S.A. declares that
the device is in compliance with Directive
2014/53/EU. The full text of the EU
declaration of conformity is available at the
following internet address: www.manuals.
fibaro.com

Technical data

Power supply:
Network interface:
Radio protocol:
Radio frequency:
Maximum transmit power:
Range:
Operating temperature:
Dimensions (W x D x H):
Conformity with EU directives:
4
Recovery button when
hold to set static
This product is not a toy. Keep away
from children and animals.
Do not expose this product to
moisture, water or other liquids.
Never place any water carrying
vessels near or on top of the unit.
Do not attempt to examine or repair
this product yourself.
This product is designed for indoor
use only. Do not use outside!

WEEE Directive Compliance

Device labelled with this symbol should not be
disposed with other household wastes. It shall
be handed over to the applicable collection
point for the recycling of waste electrical and
electronic equipment.
10/100/1000 Base-T (Gigabit) Ethernet (RJ-45)
868.4, 868.42, 869.8 MHz EU;
908.4, 908.42, 916.0 MHz US;
921.4, 921.42, 919.8 MHz ANZ;
(depending on building structure)
12V DC (included)
Z-Wave
869.0, 869.02 MHz RU;
0dBm
up to 30m
10-40°C
225 x 185 x 44 mm
RED 2014/53/EU
RoHS 2011/65/EU