Server Ip - Union Community AC-5000 User Manual

Hide thumbs Also See for AC-5000:

Table of Contents

AC-5000 / 5100 User Guide

3.4.1. IP

Select ◆ [ENT~]  [2. Network]  [1. IP] in the initial screen ◆, and the following

screen appears:

Select [1] when a fixed IP address is assigned to the connected network and select [2] in

cases where there is a DHCP server in the connected network which is assigning the

address. Set IP, Subnet Mask, and Gateway if it is a fixed IP. There's no need to set the

address if the user selected a flexible IP address.

The user can exit to the parent menu using the [ENT~] key to apply the changed values,

after finishing the settings, or use the [F4 (←)] key to cancel input during setting. In this

case, the user can only exit by pressing the key for 2 seconds or longer if they are

inputting value in the input box.

3.4.2. Server IP

Select ◆ [ENT~]  [2. Network]  [2. Server IP] in the initial screen ◆, and the

following screen appears:

UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,

Songpa-gu, Seoul, 05836, Republic of Korea

TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :sales@unioncomm.co.kr

http://www.unioncomm.co.kr

Press the applicable key that represents the item to

be changed.

When changing IP, delete the existing values using

[F4 (←)] and then input the new values. The '.' in

between

the

number

automatically. Example: input 192 168 010 50

sequentially to input '192.168.10.50'.

sequence

created

Table of Contents

Ac-5100