Table of Contents
Advertisement
MN002859A01-A
Chapter 2: Getting Started
Charging the LEX L10ig
Before using the LEX L10ig for the first time, charge the battery using the provided USB Charger and
USB Cable or connect the USB Cable to the USB port of a personal computer. An unused battery fully
charges in less than six hours.
The LEX L10ig battery can also be charged by one of the optional charging cradles.
Figure 8: Charging the LEX L10ig
NOTICE: Keep the USB cover closed when USB not in use.
NOTICE: For detailed description, installation and operation of the LEX L10ig accessories, refer
the quick start guides provided with each accessory.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligently
controlled by the LEX L10ig.
To accomplish this, for small periods of time, the LEX L10ig alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The LEX L10ig LED indicates when charging
is disabled due to abnormal temperatures by fast blinking amber (once every 2 seconds).
Battery Charge Indications
The Charge and Notification LED is located at the top, front of the LEX L10ig.
Battery charging and power level are also indicated by a battery icon on the status bar.
NOTICE: Before checking the battery charge level, remove the LEX L10ig from any power
source (cradle or USB cable connection).
40
Send Feedback
Advertisement
Table of Contents
Troubleshooting
