Table of Contents
Advertisement
6.8.3. Access NEXCOM NIO200 admin website
This section allows the user to navigate to NEXCOM NIO200 admin website, where the NIO200
Network Configuration (Wi-Fi settings, IP Addresses, NTP Server, etc.) can be changed.
6.9 Bulk Transfers
The Bulk Transfers page enables you to create and configure bulk transfers. Bulk data transfers
are used to transfer large items between wireless devices (sensor boards) and gateway clients.
This can be done via two methods:
A transfer method described by ISA running on top of UDO
A Nivis enhanced bulk data transfer protocol
Already configured bulk transfers are displayed in a table, with the following information:
EUI-64 Address – the EUI-64 Address of the source device
Transfer Type – the selected transfer protocol (UDO or BTO)
November 2017
Page 93
Advertisement
Table of Contents
