Table of Contents
Advertisement
6.4.2. Configuring Gateways
By design the NIO 200IAG Gateway supports only one ISA100 Gateway; therefore it is not
NOTE:
permitted to add more than one gateway to the system.
Step
To edit the gateway
1.
Click on the entry that you want to edit in the gateways list.
2.
Edit the security key and/or subnet ID, and click Save to save the changes in
the"system_manager.ini" file.
3.
Click the Activate button to load the changes into the System Manager. The changes
will be visible in the network topology and where applicable in the device list.
To delete the gateway
1.
Select the desired gateway in the list and click Delete.
2.
You will be asked for confirmation. Click Yes to delete the gateway or No to abort the
action.
IMPORTANT:
Click the Activate button to load the changes into the System Manager. The
4.
changes will be visible in the network topology and where applicable in the
device list.
November 2017
Caution! If you delete the gateway, you will no longer be able to
access the system and retrieve any data, although the network
remains functional.
Action
Page 83
Advertisement
Table of Contents
