Restart; Access Nexcom Nio200 Admin Website - Nexcom NIO200 HAG User Manual

7.6.3. Restart

This section enables the user to restart the applications running on the NIO 200HAG Gateway.
The "Restart Applications" restart all applications, without rebooting the board.
The "Restart NIO200 Hardware" reboots the NIO 200HAG Gateway.
After restarting the applications or rebooting the NIO 200HAG Gateway, the Monitoring
Control System becomes inoperative for a few minutes.
NOTE:
After Stopping the applications, the Monitoring Control System becomes inoperative until
the next power cycle.

7.6.4. Access NEXCOM NIO200 admin website

This section allows the user to navigate to NEXCOM NIO200 admin website, where the NIO200
Network Configuration (WiFi settings, IP Addresses, NTP Server, etc) can be changed.
NIO200 HAG User Guide Page 62 of 120