Table of Contents
Advertisement
6.8.1.
Edit Configuration Variables
This page allows you to view/set less common configuration variables, which cannot be changed
using the classic MCS web interface.
This page is for advanced users only – do not use unless you have been instructed exactly
IMPORTANT:
by a NEXCOM representative on what values to change. Incorrect values may render the
router dysfunctional, or may cause difficulty to trace malfunctions.
Step
1.
The following form will open to the right of the operation list:
2.
In the form, select a Section in the drop-down list. The Variable list will change
accordingly.
Select a Variable in the drop-down list.
3.
IMPORTANT:
4.
Set/edit the Value field, then click Set.
November 2017
Action
Do not change [GLOBAL].AN_ID under any circumstance.
Page 91
Advertisement
Table of Contents
