Table of Contents
Advertisement
When the device page is loaded, the registered devices are displayed by default.
Step
Search by EUI-64 address
1.
To search a device by its EUI-64 address, type the address in the EUI-64 Address
input field,
or
For a partial search:
2.
Click Search. The system will retrieve all the devices whose EUI-64 addresses contain
the characters provided by the user.
NOTE:
Search by device tag
1.
A tag is a custom description that you can assign to a device in order to facilitate
identification of that device in the plant. One tag can be assigned to a single device.
To search for devices based on their tag, type the tag in the Device Tag input field.
2.
Click Search.
NOTE:
Search by device state only
1.
To display devices based on their state at a given time, select the desired state from the
Show Devices drop-down list. The device list will update automatically.
A device can be in only one of the following states at a given moment in time:
November 2017
Type part of the EUI-64 address in the EUI-64 Address input field
Select the desired state from the Show Devices drop-down list
To delete the search parameters, click Reset.
The tag field is case sensitive.
To delete the search parameters, click Reset.
Registered – the device has successfully joined the network and is ready to
operate
Joining process – the device has been provisioned and is attempting to join the
Action
Page 41
Advertisement
Table of Contents
