Table of Contents
Advertisement
When you delete an Access Point the devices in its network will be unable to join until a new Access
Point provisioned with the same security key and Network ID is added to that network.
After you perform any of the above operations, click Activate to load the changes into the Network
Manager. The changes will be visible in the network topology and where applicable in the device list.
7.4.2.
Configuring Gateways
To edit the Gateway:
1. Click on the entry that you want to edit in the Gateways list
2. Edit the security key and/or Network ID, and click Save to save the changes in the
"whart_provisioning.ini" file.
After you edit the Gateway section, click Activate to load the changes into the Network Manager. The
changes will be visible in the network topology and where applicable in the device list.
7.4.3.
Configuring Devices
Adding devices:
You can add devices either individually, one device at a time, or you can add multiple devices at a
time.
To add a single device in the network type its EUI64, security key, and Network ID in the empty edit
box and click Save. The new device will be added to the Devices list.
To edit a device / multiple devices:
1. In the device list, click on the entry that you want to edit,
2. Edit the security key and/or Network ID,
3. Click Save to save the changes in the"whart_provisioning.ini" file.
NIO200 HAG User Guide
Page 50 of 120
Advertisement
Table of Contents
