Table of Contents
Advertisement
Receive (CH:...)
That's how you configure your
device with an external DMX or
MIDI controller:
The Receive (CH:...) mode is to be selected when an external DMX or MIDI controller is used.
The Receive (CH:...) mode is selected, in the display, the LED [Receive] lights up.
1.
To enter the device settings, press [MENU].
ð Settings for MIDI-IN channels, MIDI note number and DMX start address can be
made here.
2.
Select the DMX start address. Press [MENU] repeatedly until the display shows 'A:xxx' .
Use [UP] and [DOWN] to set the desired DMX start address to a value between 'A:001'
and 'A:512' .
3.
Select the MIDI-IN channel. Press [MENU] repeatedly until the display shows 'CH:xx' . Use
[UP] and [DOWN] to set the desired channel 'CH:01' to 'CH:16' .
4.
Select the MIDI note number. Select 'MIDI-Note Number' . Press [MENU] repeatedly until
the display shows 'N:xxx' . Use [UP] and [DOWN] to set the desired value ' N:001' to 'N:
128' .
Operating
MPX 405
23
dimmer pack
Hide quick links:
Advertisement
Table of Contents
