Table of Contents
Advertisement
Operating
Chase (P:...)
That's how you configure your
device without an external DMX
controller:
MPX 405
22
dimmer pack
The Chase (P:...) mode is to be selected when no external DMX controller is used.
The Chase (P:...) mode is selected, in the display, the LED [Chase] lights up.
1.
To enter the device settings, press [MENU].
ð Settings for dimming, running-light programme and running-light speed can be
made here.
2.
Select the dimming settings. Press [MENU] repeatedly until the display shows 'd:xxx' . Use
[UP] and [DOWN] to set a value between 'd:001' and 'd:100' .
3.
Select the running-light programme. Press [MENU] repeatedly until the display shows
'P:xx' . Use [UP] and [DOWN] to select the desired running-light programme 'P:01' to 'P:
16' .
4.
Select running-light speed. Press [MENU] repeatedly until the display shows 'SP:xx' . Use
[UP] and [DOWN] to adjust the desired running-light speed 'SP:01' bis 'SP:99' .
Hide quick links:
Advertisement
Table of Contents
