Ignite The Plasma - Agilent Technologies Agilent 7700 Series ICP-MS Quick Start Manual

Ignite the plasma

1 Open the Instrument Control panel in either of the following ways:
2 Confirm that the instrument is in Standby mode by checking the title bar of
3 Ignite the plasma by clicking the Ignite Plasma
4 Once the plasma is on and the instrument goes from standby to analysis
G7200-90210 (Rev. A) MassHunter Workstation Quick Start Guide
• Select Instrument Control from the Instrument menu, or
• Click the Instrument Control
The ICP- MS Instrument Control panel opens:
the Instrument Control panel.
mode, check tuning as described in the following section.
icon.
icon in the toolbar.
5