Access Method Parameters Directly; Use The Method Wizard To Create A Method - Agilent Technologies Agilent 7700 Series ICP-MS Quick Start Manual

Access Method parameters directly

You can access some method panels directly, using the following menu items:
Method parameters
Method Information
Select Sample Items,
Select QC Items
(Intelligent Sequence
Software is installed)
Interference Equation
Acquisition Mode
Spectrum Acquisition
Parameters
Peristaltic Pump
Program
Method Save Options

Use the Method Wizard to create a method

This way of creating a method makes it easy to create methods for
environmental analyses, since it supplies many of the parameters that are
appropriate for various sample types and regulations.
1 Select Run Method Wizard from the Methods menu in ICP- MS Top.
General Items 2 Enter name for the method and click the Next> button.
Sample 3 Select the sample as follows:
G7200-90210 (Rev. A) MassHunter Workstation Quick Start Guide
Window
ICP-MS Top
ICP-MS Top
ICP-MS Top
Acquisition
Acquisition
Acquisition
ICP-MS Top
a Select Environmental as the Application Type.
b Select a Sample, such as Drinking Water or High TDS. A description of
the current selection is displayed in the lower part of the window.
c Select a Regulation, such as EPA200.8 or EPA6020. Only the guidelines
that apply to the selected sample are displayed.
d Click the Next> button.
Menu Menu item
Methods Edit Method Information
Methods Select QC Items
Methods Edit Interference Equation
EditParameters Set Mode
EditParameters Set Parameters
PeriPump Set Peripump Program
Methods Save As
19