View analysis results
Batch Table
1 View the concentration and count for each element in the samples in the
pane
Spectrum
2 View mass spectra in the Spectrum pane. You can zoom in to identify
pane
Calibration Curve
3 View calibration curves for each element in the samples in the Calibration
pane
ISTD Stability
4 View the percent recovery of each ISTD element in the ISTD Stability Graph
Graph pane
G7200-90210 (Rev. A) MassHunter Workstation Quick Start Guide
Batch Table pane.
•
Concentration and count for problematic data (Outlier) are displayed
with a color of each Outlier background.
•
See online help for information if you want to change the way the data is
displayed, such as sorting or customizing the columns
•
Also see online help for information on changing the layout or doing auto
review.
elements by right- clicking and dragging the mouse cursor around the
desired mass number. See online help for information on other ways to
display or process data in the Spectrum pane, such as:
•
Switching between log and linear
•
Switching between one- row and three- row
•
Adding comments
•
Identifying unknown spectra against an element database
•
Subtracting background spectra
•
Overlaying multiple spectra
•
Tabulating the spectral information
Curve pane.
•
Problematic calibration curves (Outliers) are displayed with a pink
background.
•
See online help for information on other changes you can make to the
calibration curve, such as excluding a calibration curve level, changing
the concentration of a calibration curve level, changing the calibration
curve type, changing the handling of the origin, or changing the
weighting of calibration curve.
pane. See online help for more information.
33