Create The Data Analysis (Da) Method For Quantitative Data Analysis - Agilent Technologies Agilent 7700 Series ICP-MS Quick Start Manual

Create the Data Analysis (DA) method for Quantitative data analysis

1 Open the Method Editor window in either of the following ways:
Tip
2 Select Data Analysis Method from Method Tasks section 2 (on the left side
3 Set the options as follows:
4 Select a Sample Template from the list.
28
• Click the Edit Method toolbar button
• Select Edit from the Method menu.
To import existing DA method, click Import Method only or Import
Method and Standard Data and select an analysis file to import.
of the screen) to display the Data Analysis Method pane
a Mark the check box for FullQuant Analysis.
b Set the Analysis Mode to Spectrum.
c Select the correction method from the Interference Correction list.
G7200-90210 (Rev. A) MassHunter Workstation Quick Start Guide
, or
3a
3b
3c