Advertisement
Step 1
You will need:
8 X Bolts
(H1)
Attach 2 x Support Bars (P2) and 2 x Legs (P1) with 8 x Bolts (H1),
Make sure the hole brackets face inside
Do not fully tighten.
Step 2
You will need:
4 X Long Screws
(H2)
4 X Short Screws
(H3)
Position Top (P3) upside down on
a soft flat surface to prevent surface damage
during assembly.
Attach metal frame to Top (P3)
with 4 x Long Screws (H2) + 4 Short Screws (H3) by
using Phillips Head Screwdriver, make sure that the holes on the
metal frame are aligned with the pre-drilled holes of the bottom of the Top (P3) first.
Fully tighten Screws.
(H1)
(P1)
ATTENTION: DO NOT MISPLACE H2 LONG SCREW IN H3 POSITION
FOR PROTECTION OF TABLE TOP
(P2)
(H1)
(P2)
(H3)
(H3)
(H2)
(P3)
(H1)
(H1)
(P1)
(H2)
(H2)
(H3)
Page 4
(H1)
Advertisement
