Alarm - Motion And Audio Detection - Wansview W3 User Manual

IP Camera W2(1080P)/W3(720P)
Security > IP Filtering
Security > Mask Area (not available for MAC users)
5.4.5

Alarm - Motion and Audio Detection

Alarm > IO Detector (disabled in this model)
56
This screen allows for the filtering
of IP addresses, either blocking
them or granting them access to
the camera.
This feature helps make the
camera more secure by limiting
remote access only to approved
users. Below is a Screen shot of the
IP Filtering screen.
Users exclude up to 4 areas from
monitoring.
Click Start Setting and check the
windows.
Camera allows user to add an
external source of alert (motion
sensor or push button). We
recommend the Instar IN-500 PIR
Sensor as external motion sensor.
The external sensor can be always
open or always close. Please check
your alarm device setting in the
user guide.