IP Camera W2(1080P)/W3(720P)
Network > Port setting
Network > Wi-Fi setting
Network > UPNP setting
50
At "Port Setting", the user can
change web access port (http
port). Port setting range:
80-65535. Pay attention not to
conflict with other port values.
At "Wi-Fi Set Up", click "Search"
and start up "Wi-Fi". Choose the
wireless router to be connected.
Input the password to connect to
the router. Click Save to complete
Wi-Fi Configuration. After
completing the configuration,
click Test to confirm whether it is
connected to the wireless router.
If the user wants to view the
camera through the internet, the
router and camera UPNP port
forwarding function need to be
turned on.
Before auto port mapping, please
ensure your router supports UPNP
and has been enabled.