Wansview W3 User Manual page 57

IP Camera W2(1080P)/W3(720P)
Alarm > Motion Detection (Intruder Monitor)
the images.
Please note that motion detection doesn't work through windows. In this case we recommend to
connect an external motion sensor out of the window using the IO alarm port.
Alarm > Audio Detection (Baby Monitor)(function disabled in this model)
Alarm > Alarm Action
The Motion Detection in the Web
Interface is more advanced than in
the App. User can set up to 4
detection areas and different
sensitivity. 15 corresponds to the
lower level and 55 to the mid-level.
The IP Camera begins recording
when it detects movement/audio
and stops recording in 30 sec. In this
section, users can customize the
motion detection feature. This
feature can be set on the app or in
the web interface. Motion is
detected by changes in the pixels of
57