Wansview W3 User Manual page 16

IP Camera W2(1080P)/W3(720P)
For Email Setting, please follow the below parameters:
Save Picture to FTP: When an alarm is detected, the camera will send pictures to your FTP
server. Click on FTP Setting to setup FTP.
Save Record to FTP: When an alarm is detected, the camera will send a video to your FTP
server.
For FTP paramters, please refer to Page 40
Save Picture to SD/TF:
Save Record to SD/TF:
Trigger IO Output: Not available for W2/W3.
Preset Linkage: When an alarm is detected, the camera will focus on one of the 8 Preset
spots (see above).
When an alarm is detected the speaker will act as a siren for the chosen
Speaker Linkage:
length (5-30sec).
16
Sender:
Smtp Server:
Smtp port:
SSL: SSL
User name:
sender
Password:
Yahoo and Gmail, please generate an app
password, and using the app password. Check the
FAQ document on website to generate app
password.
Receiver:
After you fill in the chart of the email setting
page, please Save
unavailable(W2/W3 cannot support SD card)
unavailable(W2/W3 cannot support SD card)
your email address
such as smtp.mail.yahoo.com etc.
465
your email address, the same with
your email password, if you are using
any email address
and Test E-Mail.