Alarm Setting - Wansview W3 User Manual

IP Camera W2(1080P)/W3(720P)

2.5 Alarm Setting

The camera is mostly for live video, what we achieve is to make the video more clear and
easy set up. it is not a professional security camera, the motion detection is only an
add-on feature. So the alarm notification will not be very accurate.
But if you want the motion detection works accurately, you may connect the camera to
some professional security software like: Blue Iris, iSpy or Sighthound, the camera alert
works great on them.
Follow the below steps to set up alarm.
Alarm Deployment
this is for camera that can connect external source of alert device. The
IO Detection:
W2/W3 is not available.
Sensor Type: For external source of alert device. The external sensor can be always open
or always close.
Motion Detection: Enable Motion Detection, user can set up camera with motion alarm
Motion Detection Sensitivity: User can choose Low/Middle/High sensitivity according to
needs.
Enable Voice Detection, user can set up camera with voice alarm
Voice Detection:
Voice Detection Sensitivity: User can choose Low/Middle/High sensitivity according to
needs.
Trigger Alone: The alarm will be triggered for any kind of active alarm
event(Motion/Voice/IO)
Trigger Link: The alarm will be triggered for multiple detection at the same
time(Motion/Voice/IO).
Alarm Action:
When an alarm is detected, the camera will send pictures to the
Save Picture to Email:
email box. Users can set up to 2 recipients.
Click Mail Setting to setup the email. Check your email provider for SMTP Server and
Port.
15