Supermicro X11SAA/A2SAV/-2C/-L User Manual page 88

X11SAA/A2SAV/-2C/-L User's Manual
RAID Level Setup
1. At the Shell prompt, type fs0: to map the USB flash drive with the Marvell BIOS Utility.
2. Type cd A2SAV.
3. Type cd Marvell firmware.
4. Type cd A2SAV_U35_88SE9230_1.1.
5. Type cd utility.
6. Type cd 1.1.0.1006.
7. Type ui64.efi. Then you will see the Marvell BIOS Setup screen on the next page. You
can also place ui64.efi in another location to serve as a shortcut, so you don't need to type
all those commands.
88