Supermicro X11SAA/A2SAV/-2C/-L User Manual page 87

Chapter 4: BIOS
4. To map the USB flash drive, type the following command at the Shell prompt: fs0:
USB flash drive names will vary depending on how many hard drives are connected to the
system.
5. Type ls to show the contents of the flash drive.
6. Type cd A2SAV to change to the A2SAV directory. Directory names may differ depending
on firmware versions.
7. Type cd Marvell firmware.
8. Type cd A2SAV_U35_88SE9230_1.1.
9. Type cd firmware.
10. Type go y and press enter to update the firmware. A "Write file is successful" message
will display when the update is complete. Reboot the system for the changes to take effect.
87