Reset Button; Power Button - Supermicro X11SAA/A2SAV/-2C/-L User Manual

X11SAA/A2SAV/-2C/-L User's Manual

Reset Button

The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. See the table below for pin definitions.

Power Button

The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend mode,
press the button for at least 4 seconds. See the table below for pin definitions.
1
Power Button
2
Reset Button
Reset Button
Pin Definitions (JF1)
Pins Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pins Definition
1 Signal
2 Ground
1 2
Ground
PWR
Reset Ground
X
X
Fan Fail LED
3.3V
3.3V Stby
NIC2 Activity LED
3.3V Stby NIC1 Activity LED
3.3V HDD LED
Power LED
3.3V
X X
Ground
NMI
19 20
1. Reset Button
2. PWR Button
30