DirectOut Technologies EXBOX.MD User Manual page 50

Issue
No signal at
the output
port.
No signal at
the output
port.
MADI signal
at the input is
not stable.
page 50 of 60
CHAPTER 6: Troubleshooting and Maintenance
Possible
reason
Signal cable
defective.
Connectors of
the signal cable
are dirty.
Signal source is
defective
or
bad signal
condition (Jitter >
1 ns) - e.g. due to
exceeded length
or bad screening
attenuation of
signal cable.
Solution
Exchange the signal cable.
Use an air supply to carefully
remove any dust.
Never use objects for
cleaning.
or
Exchange the signal cable.
Change the source
or
use appropriate cables.
EXBOX.MD Manual - Version 1.0