Table of Contents
Advertisement
SETUP MODE
LIMITS CALIBRATION / OTHER PARAMERS SETUP
REMINDER :
* To enter SETUP MODE press ESC + CW BUTTONS.
* Use REQUEST to go thorugh the Menu Items / pages.
* There is 4SETUP pages on display marked as
shown in negative.
When you enter SETUP MODE, with buttons ESC + CW, current position will be on the page 1, 2, 3 or 4. To
go on the first page (picture 1. or picture 2.) of SETUP MODE turn REQUEST fully contraclockwise.
MENU ITEMS – SETUP 1/4
REMINDER :
While rotating REQUEST we are walking through SETUP MODE.
Line in
NEGATIVE
is choosed item.
With ENTER memorise new value. (on picture 1. choosed Item is
picture 1. is Range : 360, and Sens : Volt. Memorised Item is checked with
MENU ITEMS – SETUP 1/4
Range
– For Menu Item 360, maximum rotation is 360 degrees, for Menu Item
greater then 360 degrees. It is from CW to CCW limits.
Sens
– Choose Menu Item Volt for POT (implemented in your tower rotor) or Pulse for your ring / verticale
rotor.
SETUP
1/3,
SETUP 1/4
Range: 360
Range: Full
Sens:
Volt
Sens:
Pulse
Picture 1.
SETUP 2/3
,
SETUP 3/3
√
√
Range : Full
. Memorised Item on
√.
Full
maximum rotation is
5.
and
SETUP 4/44
Advertisement
Table of Contents
