Table of Contents
Advertisement
In the case of Pulse sens, position and limits settings are little different. First we must adjust CCW Limit!!!!
In the case of pulse sensor
before calibration. This is because internal work of microcontroller. Actual position (picture 7. value 1496) will
get value 1000.
After CCW limit calibration, use REQUEST to walk throgh menu and go to
your tower / antenna rotor to North position and momorise value.
Now we have to setup
CW
limit.
If we choose rotation OVER SOUTH calibration is the same as OVER NORTH but with difference that
we should memorise SOUTH position.
REMINDER:
WITH REQUEST GO THROUGH MENU ITEMS / PAGES.
DONT FORGET TO PRESS ENTER AFTER YOUR FAVORIT ITEM IS CHOOSED!
SETUP 2/4
Over North
Over South
CCW Limit:
Not in use
North
CW Limit:
Picture 7.
Tower rotation OVER NORTH with PULSE sensor
CCW limit
will be automaticly adjusted to 1000 value, no matter which value was
limit. We will repeat
CCW limit
SETUP 2/4
Over North
Over South
CCW Limit:
Not in use
South
CW Limit:
Picture 8.
Tower rotation OVER SOUTH with PULSE sensor
1496
√
1000
:
2800
4600
setup but with value that will be memorised as
1496
√
1000
:
2800
4600
NORTH :
postition, with CW turn
CW
Advertisement
Table of Contents
