Table of Contents
Advertisement
Chapter I. Chelsio Unified Wire
8.2.
Zip Package
If the driver components were installed using the zip package, they will have to be uninstalled
manually. The following section lists the various components and their respective methods of
uninstallation.
The driver components need to be uninstalled strictly in the order described
Important
here. Using any other order is not supported.
NDIS Miniport driver
i.
Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the Network Adapters, right click on the Chelsio Network Adapter and
select Uninstall.
In case of Virtual Functions in VM, use Chelsio VF Network Adapter.
Note
ii. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
iii. Repeat the same procedure for the other Chelsio Network Adapters.
Virtual Bus Driver
i.
Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the System Devices, right click on the Chelsio T5 40G/10G Bus
Enumerator and select Uninstall.
In case of Virtual Functions in VM, use Chelsio T5 40G/10G Bus Enumerator
Note
[Virtual Function].
ii. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
Generic Function
i.
Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the Network Adapters, right click on the Chelsio T5 40G/10G Generic
Function and select Uninstall.
ii. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
iii. Repeat the same procedure for the other Generic Functions.
Chelsio T5 Unified Wire for Windows
96
Advertisement
Table of Contents
Need help?
Do you have a question about the Terminator 5 and is the answer not in the manual?
Questions and answers