Chelsio Communications Terminator 5 Installation And User Manual page 172

Chapter VII. Unified Wire Manager (UM)
team may be created with a DHCP or Static IP address. Please check with the driver
documentation for the supported modes for creating a team / bond, with offload enabled Chelsio
cards. All modes may not be available with all configurations / combinations. Also, the team
members can only be 2 ports of a single offload-enabled card, and not across Chelsio cards. Do
not mix third party cards and offload-enabled Chelsio cards in a single team.
Figure 123 - Create a network team/bond device module for Linux Agent
Network troubleshooting
This module allows detecting and troubleshooting various network connectivity issues. The Ping
utility helps to contact a system by specifying IP address, Number of ICMP packets to send and
packet timeout. The result of the ping can be viewed by clicking on the Ping Result button.
Using TraceRoute one can determine the route taken by packets across an IP network.
Use the GetConnections utility to view currently active TCP/UDP connections. Offload status for
each connection is also displayed if protocol offload hardware is available. This is useful for
troubleshooting any connectivity issues for clients to various services.
Chelsio T5 Unified Wire for Windows 172