Chelsio Communications Terminator 5 Installation And User Manual page 168

Chapter VII. Unified Wire Manager (UM)
Port statistics
Ethernet statistics and additional hardware statistics for the port are displayed in this module.
Networking Management page
The system networking configurations are shown on this page. IP addresses, MTU, VLAN Ids,
DNS and default gateway settings can be viewed and modified here. Network adapters can also
be enabled or disabled as required. The modules available on this page are as below:
System Network configuration
The list of network adapters on the system is displayed in a list on the left. The icon for the adapter
indicates whether it is administratively enabled and if it is connected to the network. The primary
IP address (IPv4) can be set for the adapter, when it is selected. There is an option to
add/modify/delete additional IP addresses or aliases for the specified adapter. Use the option to
add additional IP addresses with caution, since multiple IP addresses configured on the same
adapter, for the same network, may result in unpredictable behavior of the system's networking
Chelsio T5 Unified Wire for Windows
Figure 116 - Port Statistics of T4 CNA on Windows Agent
168