Section 5 Receiver Operation - Omega UWTC-1 User Manual

5
Receiver Operation
Section 5 - Receiver Operation
UWTC-REC1 (1) Antenna (2) USB Port (mini-B) (3) Indicator Lights
UWTC-REC2
(1) Antenna
(2) USB Port (mini-B)
(3) Indicator Lights
(4) Output/Alarm Connection
Pin#1 - Analog Output (+)
Pin#2 - No Connection (Reserved)
Pin#3 - No Connection (Reserved)
Pin#4 - No Connection (Reserved)
Pin#5 - Alarm Ground
Pin#6 - No Connection (Reserved)
Pin#7 - Alarm Power (0 to 24 Vdc)
Pin#8 - Alarm Output (Open
Pin#9 - Analog Output (–)
5-1
1
WIRELESS RF RECEIVER
®
FCC ID: OUR–XBEEPRO
IC #4214A–XBEEPRO
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference;
2) This device must accept any interference received,
including interference that may cause undesired
operation.
OMEGA ENGINEERING, INC.
Stamford, CT 06907
Figure 5-1. Receiver Operation - UWTC-REC1
Drain to Pin#8, 10K pull-
up to Pin#7, 200 mA Max)
(5) Power LED
(6) DC Power Jack
(12 to 16 Vdc @ 300 mA)
Figure 5-2. Receiver Operation - UWTC-REC2
2
3
USB
TX
RX
SB
PWR
UWTC SERIES
2.4 GHz
F
!
omega.com
Made in U.S.A.
1
UWTC SERIES
WIRELESS TRANSCEIVER
®
I/O
UWTC-RPT1 SIDE VIEW
1 2 3
6 7 8
4
2
3
USB
TX
RX
SB
PWR
2.4 GHz
OMEGA ENGINEERING, INC.
Stamford, CT 06907
omega.com Made in USA
12–16 Vdc
- +
4 5
9
5 6