Table of Contents
Advertisement
Quick Links
L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are
warranted to be free from defects in materials and workmanship under normal use. If a product sold by the Company
proves to be defective, the Company will repair or replace it free of charge within the first year and thereafter all
parts to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.'s labor and
return shipping, to the original owner during the lifetime of the car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc., P.O.
Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase. This warranty is
nontransferable and does not apply to any product damaged by accident, physical or electrical misuse or abuse,
improper installation, alteration, any use contrary to its intended function, unauthorized service, fire, flood,
lightning, or other acts of God.
This warranty limits the Company's liability to the repair or replacement of the product. The Company shall
not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or any
incidental or consequential damages caused by any failure or alleged failure of the product to function properly.
Under No Circumstances Should This Warranty, Or The Product Covered By It, Be Construed As A Guarantee Or
Insurance Policy Against Loss. The Company neither assumes nor authorizes any person or organization to make
any Warranties or assume any liability in connection with the sale, installation, or use of this product.
This device complies with FCC Rules part 15. Operation is subject to the following two
conditions, (1) This device may not cause harmful interference and, (2) This device must
accept any interference that may be received, including interference that may cause
undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unautho-
rized modifications to this equipment. Such modifications could void the user's authority to
operate the equipment.
W A R R A N T Y
6/02 MO_REC-11/433
REC-11
REMOTE RECEIVER UNIT
OWNER'S MANUAL
This product is designed for professional installation only!
COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT 2000
Advertisement
Table of Contents
Related Manuals for Omega + REC-11
Summary of Contents for Omega + REC-11
- Page 1 L I M I T E D L I F E T I M E Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are warranted to be free from defects in materials and workmanship under normal use. If a product sold by the Company proves to be defective, the Company will repair or replace it free of charge within the first year and thereafter all parts to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.'s labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed.
- Page 2 REC-11 Operating Instructions Introduction The REC-11 is a fully-featured Remote Keyless Entry System with Starter Disable designed by Omega Research and Development, a leader in vehicle security and convenience systems since 1970. Please note that this advanced personal convenience system has Programmable Features which can be configured by the installer.
-
Page 3: Transmitter Functions
14) Transmitter Activated Anti-Carjacking: Default OFF. This Feature adds Anti-Carjacking protection, and the ignition must be "on" for the Anti- Carjacking to operate. Press and hold the transmitter's II button for 3 seconds. The piezo will start beeping 53 seconds later, and for the next seven seconds pressing the Valet Switch once will cancel the Anti-Carjacking Feature. -
Page 4: Transmitter Features
Transmitter Features Concealed Transmitter Codes: Each system includes two transmitters, and up to two additional transmitters can be stored in the unit's memory for your convenience. Each transmitter has its own unique code. Thus, no other transmitter is coded the same as yours. In fact, no one, including the factory, can program another transmitter exactly like yours because the code is built inside the transmitter's microprocessor and cannot be seen or copied. -
Page 5: Audible Confirmation
transmitter has been used to unlock them. Turning the ignition "on" during the 90 second period will cancel the automatic relocking. Doors Lock With Ignition "On": Default ON. Ignition "Off" Unlock #1: Default ON. Ignition "Off" Unlock #2: Default ON. These three Features control the doorlocks in relation to the ignition being turned on or off. - Page 6 turned "off" as a reminder. Single beeps will also accompany the engagement of automatic locking and starter interrupt circuit engagement. This confirmation can be from the included piezo or the vehicles’ horn. Visual Confirmation The REC-11 has built-in relays which illuminate the vehicle's parking and dome lights to provide a visual confirmation of the system's operations.
-
Page 7: Programming Features
Programming Features The REC-11 Remote Keyless Entry and Security System has features that can be accessed through the Features Programming Mode through using the Valet Switch and the transmitter. The Features Programming Mode is accessed by turning "off" the ignition switch and properly pressing the Valet Switch. -
Page 8: Starter Disable
Step 1. Enter the vehicle normally. Step 2. Using your key, turn "on" the ignition. Be prepared to perform the following Step before 5 seconds expires. Step 3. Within 5 seconds, press and release the Valet Switch*. The system will be immediately overridden. *Important: If a coded valet has been programmed you must enter your secret code to perform this override. -
Page 9: Programming Transmitters
- Audible Confirmation: As previously mentioned, the piezo or vehicles’ horn confirms the reception of transmitter commands. If desired, the audible confirmation may be deactivated. - Automatic Starter Interrupt Engagement: If desired, the starter interrupt circuit may be programmed to automatically engage 90 seconds after the ignition is turned off; and/or 90 seconds after remotely unlocking unless the ignition switch is turned on within the 90 second period. -
Page 10: Dealer Programmable Options
5) Within 10 seconds press the LOCK button on the first transmitter you wish to encode to the system. The piezo will sound then beep twice to indicate the transmitter's code is learned by the system. It is only necessary to press the LOCK button. 6) Repeat Step 5 within 10 seconds for each additional transmitter.