Channel Configuration Screen - Omega UWTC-1 User Manual

3
Software
3.5.3 Channel Configuration
From the "Tools" pull-down menu select "Configure"...."Channel 1" or click
the "Options" button in the channel box you wish to configure. This will open
the program settings table were you can make selections on how you want
your system to operate.
➀
In the Description Field you can type a reference name that is associated
with the location or process being measured by the connector/transmitter for
address. Example: "Test Chamber 1"
3-7
Figure 3-10. Channel Configuration Screen
1
2
3
8
4
Figure 3-11. Configuration Channel 1 Screen
Description Field
5
6
7