LED indicators and buttons ..............12 RF interface ....................13 Modem start up ..................13 Bluetooth ....................13 Data transfer via SATEL Compact-4BT ............. 14 Charging the battery ................14 Battery capacity ..................15 TECHNICAL SPECIFICATIONS ..............16 MODEM SETTINGS ..................18 Default settings ..................
Version 1.5B 1 IMPORTANT NOTICE All rights to this manual are owned solely by SATEL OY (referred to in this user guide as SATEL). All rights reserved. The copying of this manual (without the written permission from the owner) by...
SATEL Compact-4BT (403-473 MHz) is allowed to be used in the following countries, either on licence free channels or on channels where the operation requires a licence. More detailed information is available at the local frequency management authority.
Page 6
SATEL Compact-4BT User Guide Version 1.5B Class B digital device statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Version 1.5B 3 PRODUCT CONFORMITY Hereby, SATEL Oy declares that SATEL Compact-4BT radio modem is in compliance with the essential requirements (radio performance, electromagnetic compatibility and electrical safety) and other relevant provisions of Directive 1999/5/EC. Therefore the equipment is labelled with the CE-marking.
The radio modem is only to be operated at frequencies allocated by local authorities, and without exceeding the given maximum allowed output power ratings. SATEL and its distributors are not responsible, if any products manufactured by it are used in unlawful ways.
Page 9
SATEL Compact-4BT User Guide Version 1.5B Do not place the device in ovens, high-pressure containers, or expose it to high water streams or underwater conditions for long periods. In the event that the device leaks battery fluids and the fluid gets into one’s eye, do not rub the eye.
Version 1.5B 5 DESCRIPTION OF THE PRODUCT SATEL Compact-4BT is a UHF radio transceiver modem. It provides a transparent data link with other SATEL Compact-4BT or SATELLINE-EASy family modems (SATELLINE-EASy, -TR1, -TR3, - TR4, -R3, -EASy Pro, -4Pro, SATEL Compact-Proof and –EASy-Proof). SATEL Compact-4BT can be interconnected to a data terminal or similar devices by three different transmission standards;...
SATEL Compact-4BT User Guide Version 1.5B 6 USER INTERFACE 6.1 Data/DC-supply interface Figure 2.1 M12 circular connector and its pin configuration SIGNAL NAME DIRECTION DESCRIPTION USB D+ IN/OUT USB data positive 2, 5, 6 DC supply- and Signal ground Transmit data (V.24 level) Receive data (V.24 level)
SATEL Compact-4BT User Guide Version 1.5B 6.2 LED indicators and buttons SYMBOL NAME COLOR DESCRIPTION Blue All devices can pair and connect Bluetooth status Only ( 10 most recent ) paired devices can connect Green CP-4BT is on Data / Mode ...
Version 1.5B 6.3 RF interface The SATEL Compact-4BT has a single TNC female connector with impedance of 50 Ohm. The output power of the transmitter is adjustable between 100, 200, 500 and 1000 mW. The greatest allowable power depends on limits set by local authorities, which should not be exceeded under any circumstances.
SATEL Compact-4BT User Guide Version 1.5B SATEL Compact-4BT is possible to set to a Bluetooth remote mode. Remote mode allow users to switch on the device remotely only by creating a connection to Bluetooth. To set the device to a remote mode Bluetooth should be enabled when the device is off by pushing the Bluetooth button for three seconds.
SATEL Compact-4BT User Guide Version 1.5B 6.8 Battery capacity A good practise is to minimise battery consumption during the operation as this can dramatically extend the operational time. The best way to minimize battery drainage is to use as little Transmit power as possible.
SATEL Compact-4BT User Guide Version 1.5B 7 TECHNICAL SPECIFICATIONS SATEL Compact-4BT complies with the following international standards: o EN 300 113 o EN 300 489 (EMC) o IEC 60950 (safety) o CFR47 part90 Values are subject to change without a notice.
Page 17
SATEL Compact-4BT User Guide Version 1.5B Transient Adjacent acc. to EN 300 113 TX-mode Channel Power Carrier power stability < ±1.5 dB Note 1: Power consumption is measured using an external power source. DATA MODEM Note Electrical Interface RS-232 / USB Bluetooth Bluetooth 2.1 / BLE...
SATEL Compact-4BT User Guide Version 1.5B 8 MODEM SETTINGS 8.1 Default settings The radio modem is delivered with the following default settings (unless otherwise specifically ordered): DEFAULT VALUES OF THE ADJUSTABLE SETTINGS ( the user can change these settings later on )
Page 19
SATEL Compact-4BT User Guide Version 1.5B Handshaking Handshaking lines apply to the DATA-port. TX buffer state Clear to send, TX buffer state RSSI- threshold, Data on channel, Always ON. not supported Ignored Ignored, Flow Control, Reception Control. Pause length 3 bytes 3….255...
PC and using SATEL Configuration Manager (CM). Programming is done using RS- 232 or USB port. The RS-232 serial port settings must match between SATEL Compact-4BT and Configuration Manager. SATEL terminal program SaTerm supports also SATEL Compact-4BT configuration.
SATEL Compact-4BT User Guide Version 1.5B 8.2.2 Controlling the device with SaTerm software 1. Start the "Satelline_Saterm.exe" software. 2. Click on the "New Terminal" button. 3. The "Serial Port Setup" window will appear. The settings should be as in the picture below except Port number should be changed to correspond with the COM port in use.
Page 22
SATEL Compact-4BT User Guide Version 1.5B 4. Now a terminal window appears. This window shows all the commands to the module and its responses. Any characters typed into the terminal will be transmitted by the modem. 5. SL commands are transmitted via the "Transmit" window. Right click on the terminal...
8.2.3 Using a mobile application SATEL Compact-4BT configuration can also be modified by Mobile application NETCO Mobile. When mobile application is used a Bluetooth is needed for data transmission. Mobile application can be downloaded from Android PLAY-shop or Apple Store with the name of “SATEL NETCO Mobile”.
Page 24
SATEL Compact-4BT User Guide Version 1.5B To be able to use SATEL Compact-4BT with Bluetooth it first should be paired with the user device where SATEL NETCO is installed. The pairing is similar what other Bluetooth devices use in general and in Android devices pairing is done through “Settings” “Bluetooth”.
Version 1.5B 10 ACCESSORIES 10.1 Data cable SATEL Compact-4BT can be connected to a terminal device by two additional cables, YC0401 DC/USB and YC0400 DC/RS232. YC0401 is intended for RS-232 serial transmission and YC0400 is intended for USB transmission. Cables allow the interconnection to USB port or to RS-232 port by D-SUB 9pin female connector.
SATEL Compact-4BT User Guide Version 1.5B 10.2 Mechanical attachments SATEL Compact-4BT can be attached in multiple ways to, wall, tripod, pole or round objects by selecting the right mechanical attachment method. 10.2.1 Rubber cover Rubber cover (MD0037) can be used to minimize the handling impacts from all directions creating a robust shield to resist, shock, vibration and drop.
10.2.2 Multipurpose attachment bracket SATEL Compact-4BT can be attached to different locations by using metal brackets. These multipurpose brackets should be combined with the rubber cover to become functional. Bracket is first inserted to its position inside the rubber cover before its usage. Bracket B is specially used for hooking setups for tripods or other similar positions.
10.2.3 Mast attachment clip SATEL Compact-4BT can be attached to top of the mast or a tripod with UFN3/4 thread with fast attachment clip mechanism. This clip is available soon, ask more from manufacturer. Clip mechanism allows user to attach the device quickly to the mast and remove it for charging or for transportation.
Mobile charging can be accomplished by car lighter plug adapter cable. Will be available soon, ask more from manufacturer. This allows SATEL Compact-4BT to be charged from any vehicle having a socket for this universal plug. This cable has an internal fuse protection.
Need help?
Do you have a question about the Compact-4BT and is the answer not in the manual?
Questions and answers