Wiring Connection - JVC KW-V640BT Instruction Manuals

Installation and Connection Installation and Connection

Wiring connection

*1 *2
*1
Purple with white stripe
10 A fuse
Light green
¥
White ] / White with black stripe
] [
Gray / Gray with black stripe
Green ] / Green with black stripe [
]
Purple / Purple with black stripe
Orange with white stripe
Light blue with yellow stripe
Blue with white stripe (12 V 350 mA)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
« *2
STEERING
REMOTE
"
USB input terminal (1 m)
To the car's reverse lamp harness when using the optional rear view camera
REVERSE
PRK SW
[
To front speakers/mid range speakers*3 (left)
To front speakers/mid range speakers*3 (right)
To rear speakers/tweeters*3 (left)
[
To rear speakers/tweeters*3 (right)
To the car light control switch
STEERING WHEEL
REMOTE INPUT
To the OE remote adapter (not supplied) which is compatible with your car
REMOTE CONT
To the power control terminal when using the optional power amplifier (Or)
ANT.CONT
P.CONT
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Gray/Red
Connect to your vehicle's steering
ST REMOTE
GND
remote harness.
Bright green/Red
Contact your JVC dealer for
Input 1
details.
Purple/Red
Input 2
Connect the antenna cord to the antenna terminal.
Extension wire ( ø )
To the car's parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
*1 Only for KW-V640BT Region 1.
*2 Only for KW-V640BT Region 4.
*3 For 3-way speaker system connection, see page 54.
Ignition key switch
Car fuse
Car battery
To the car chassis
ENGLISH 53