JVC KW-V640BT Instruction Manuals page 36

Bluetooth® Bluetooth®
For a Bluetooth device compatible with
Bluetooth 2.0:
Select the unit ("KW-V6") on your Bluetooth device.
• If a PIN code is required, enter the PIN code
shown on the screen (initial: "0000").
To change PIN code, see page 35.
2
Determine usage as a hands free device
( 1 ), then touch [Close] ( 2
[Hands Free1]/ Select hands free number to
[Hands Free2] use as the hands free device.
[No Connection.] Select this when you do not
want to use as the hands free
device.
3
When your Bluetooth device is compatible
with A2DP or SPP: Determine usage as
an audio player or a device with Apps
installed.
[Yes] Select to use the device as an audio player.
[No] Select this when you do not want to use
the Bluetooth device as an audio player.
34 ENGLISH
4
When your Bluetooth device is compatible
with PBAP: Select whether to transfer the
phonebook of your Bluetooth device to
the unit or not.
[Yes]
[No]
).
Connecting/disconnecting a registered
Bluetooth device
1
Display the <Select Device> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Bluetooth].
On the <Bluetooth Setup> screen, touch [Select
Device].
2
Select the device you want to connect/
disconnect.
Select to transfer the phonebook from
your Bluetooth device.
Select this when you do not want to
transfer the phonebook.
The icons beside the registered device indicate the
following:
/ : Connected as a mobile phone.
•
• : Connected as an audio player.
3
Select the usage of the device (
touch [Close] ( 2 ).
Each time you touch the selection, the usage is
selected (" " appears) or deselected ("
disappears). Select to connect and deselect to
disconnect the device.
[TEL (HFP)1]/ Select to use as the hands free
[TEL (HFP)2] device.
[Audio (A2DP)/ Select to use as the audio
App (SPP)] player or device with Apps
installed.
To delete the registered Bluetooth device: Touch
[Delete] in step 2, select devices to delete, then touch
[Delete]. A confirmation message appears. Touch
[Yes].
• To select all devices, touch [ All].
• To deselect all selected devices, touch [
1 ), then
"
All].