Wiring Connection - JVC KW-V255DBT Instruction Manual

Installation and Connection Installation and Connection

Wiring connection

10 A fuse
Purple with white stripe
Light green
Light blue with yellow stripe
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
Aerial input jack*1
- - - - - (Or) - - - - -
DAB aerial input jack*2
Connect the aerial cord to the aerial input terminal
To the car's reverse lamp harness when using the optional rear view camera
Extension wire ( ø )
To the OE remote adapter (not supplied) which is compatible with your car
(If no connections are made, do not let the cable come out from the tab.)
Connecting the ISO connectors
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Red
(Ignition wire)
Red (A7)
Unit
Yellow
Yellow (A4)
(Battery wire)
Default wiring
To the car's parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Pin
A4 Yellow
A5 Blue/White
A6 Orange/White
A7 Red
A8 Black
Vehicle
]
B1/B2 Purple / Purple/Black
]
B3/B4 Gray / Gray/Black
B5/B6 White ] / White/Black
]
B7/B8 Green / Green/Black
*1 Only for KW-V250BT: Connect the
aerial cord.
*2 Only for KW-V255DBT: Connect the
DAB aerial (separately purchased).
*3 Only for KW-V255DBT.
*4 For 3-way speaker system
connection, see page 44.
Color and Function
: Battery
: Power control (12 V 350 mA)
: Dimmer
: Ignition (ACC)
: Ground connection
[
: Right speaker (Rear/Tweeter*4)
[
: Right speaker (Front/Mid Range*4)
[ : Left speaker (Front/Mid Range*4)
[
: Left speaker (Rear/Tweeter*4)
ENGLISH 43