Tools Needed For Assembly; Carton Contents - Porter-Cable PCXB620DP Instruction Manual

TOOLS NEEDED FOR ASSEMBLY

Supplied
3 mm hex key
4 mm hex key
Not Supplied
Slotted screwdriver
Wrench
Adjustable wrenches
Combination square
Block of wood
Hammer or rubber
mallet

CARTON CONTENTS

UNPACKING AND CHECKING CONTENTS
Carefully unpack the drill press and all its
parts, and compare against the list below and
the illustration on the next page. Place the
drill press on a secure surface and examine
it carefully.
WARNING
!
● To avoid injury from unexpected starting
or electrical shock, do not plug the
power cord into a source of power during
unpacking and assembly. The cord must
remain unplugged whenever you are
adjusting/assembling the drill press.
● The drill press is heavy and should
be lifted with care. If needed, get the
assistance of someone to lift and move
the drill press.
● If any part is missing or damaged, do not
attempt to assemble the drill press, or
plug in the power cord until the missing or
damaged part is correctly replaced.
TABLE OF LOOSE PARTS
ITEM DESCRIPTION
A. Head Assembly
B. Table Assembly
C. Base
D. Feed Handles
E. Chuck & Key Hardware
Chuck
Chuck Key
Column Assembly
F.
G. Hardware Bag
Lock Handle
Crank Handle
Worm Gear
Hex Wrenches
Hex Bolts
Rack
Rack Ring
H. Aa Batteries
10
Q'TY
1
1
1
3
1
1
1
1
1
1
2
3
1
1
2