Dam Answering - Olympia OL2410 Owner's Manual

Hide thumbs Also See for OL2410:
Table of Contents

Advertisement

3) Press "REC/memo" button, the unit will start recording announced "now
recording" followed by a beep. The 7-segment LED will indicate elapsed
recording time in seconds, counting from " 0" to " 59 ".
4) Press " Stop" button to stop recording with a beep and the recorded OGM
will be played automatically.
5) If the recorded time is less than 3 seconds, DAM will announce " Message
was not recorded. Please record longer message again".
6) If memory becomes full while recording, DAM will announce "Memory is
full" and stop the recording.
7) If you don't stop the recording within 60 seconds, the recording will be
stopped automatically after 60 seconds and it will be playback at once.
l
To review/ delete your announcement (OGM Play/Delete)
1) Press Menu button three times to access announcement mode. The 7-segment
LED displays "A1/A2" with voice prompt "announcement one / two".
2) Press any Mailbox button, the 7-segment LED displays "A1" / " A2".
or
3) You can only review the latest record.
4) Press Delete button during playing announcement will delete the message
being playing, and then the DAM will use the pre-recorded announcement
until you record a new one.

9.4 DAM Answering

When an external call is received, you may to answer the call by answer machine.
OLYMPIA OL2410 Owner's Manual
PDF created with FinePrint pdfFactory trial version
or
59
http://www.fineprint.com

Advertisement

Table of Contents
loading

Table of Contents