HGI Generators SKD100-I Operation And Maintenance Manual page 36

GB
08.1 PACKING, TRANSPORTING AND
STORING THE UNIT
Packaging
The package is provided by manufacturer.
Disposing of packaging onto land is
strictly forbidden.
Transport (picture 1)
Do not overturn the generator (with or without packaging)
during transport.
The generator must be transported without fuel to avoid
any leakage.
The generator must be secured to the vehicle during
transportation.
Storage
The generator unit must be stored in the horizontal posi-
tion.
08.2 LIFTING AND MOVING THE UNIT
All lifting operations must be carried out by
qualified personnel, such as fork lift ope-
rators, crane operators and slingers. The
operator should be deemed responsible for
using the correct method of slinging and
lifting the generator unit.
Lifting and moving
The generator must be lifted and moved as indicated in
figures 2, 3 and 4. Make sure that lift ropes or chains are
approved and of sufficient capacity. Always use the lifting
eyes provided by the manufacturer as indicated. Use a
fork lift of proper capacity, fitted with wide forks, and lift
the unit as illustrated (fig. 3).
Never leave the load insecure.
Lay the generator on the ground gently.
When lifting and moving the generator,
do not stay or walk within it's proximity.
36
498-1060
08. MOVING THE GENERATOR
pic.1
Never leave the generator slung overhead
(fig 4).
When moving and transporting the
generator, do not tilt it excessively.
pic.2
pic.3
pic.4
SKD100