WARNING
Strangulation Hazard: Children have STRANGLED in cords. Keep this
cord out of the reach of children (more than 3ft (0.9m) away). Never
use extension cords with AC Adapters. Only use the AC Adapters
provided.
Plug in the camera
Plug one end of the included power cable into the DC In jack on the
back of the camera.
Plug the other end into the included power adapter. Then plug the
adapter into an outlet or surge protector.
The camera turns on automatically when you plug it in (the indicator
light on its back panel turns solid red).
IMPORTANT: Make sure you carefully remove the protective film
covering the camera's face and lens before you continue setup.
5
Need help?
Do you have a question about the PNMAL2 and is the answer not in the manual?
Questions and answers