Project Nursery PNMAL2 Manual page 12

Speaker front
12
STEP 4: SET UP THE SPEAKER
AND SPEAKER APP
Once you've entered the information for your WiFi network and chosen
your speaker, press and hold the WIFI/BLUETOOTH button on the front of
the speaker until the speaker announces "Connecting to your network...this
may take 1 to 3 minutes." Then release the button.
Press the Next button in the App to proceed. The App is now connecting
the speaker to your WiFi network. This might take a few minutes.
Once your speaker has successfully connected to your WiFi network, the
speaker says "Connected" and the App lets you know that the speaker is
connected. Press Next to continue.
In the next App screen, choose a name for your speaker.
What if the App doesn't connect the speaker?
If the App can't connect the speaker to
your WiFi network directly, it leads you
through the steps for an alternate setup.
1. Follow the steps in the App alternate
setup to connect your phone or tablet to
the speaker.
If you're prompted for a password, use
"password808" to connect.
2. Connect the speaker to your WiFi
network.
(continued)