Advertisement
Quick Links
Accessory Camera
Quick Start Guide
Unpack
1
(1) 10-foot charging cable
(1) power adapter
Wireless camera
Check out our setup videos
On your computer, go to
ProjectNursery.com/Electronics or
scan the QR code here.
Pair the camera with your monitor(s)
2
Before you start pairing the monitors with your camera, bring
the camera into the same room so that you have it handy. You
can put it in the baby's room once you've finished pairing.
1
2
PNMC01 QSG 01
Make sure the monitor you want to pair this camera with is
3
turned on. If it isn't press its POWER button to turn it on.
4
5
Plug one end of the charging cable
into the DC In jack on the back of
the camera.
Plug the other end into the single
charging adapter. Then plug the
adapter into an outlet or surge
protector.
The camera turns on automatically
when it's plugged in (the indicator
light on the base below the camera
lens turns blue).
Press the MENU button
on the monitor. The menu
appears on screen.
Use the arrows to
highlight CAMERAS.
Press OK/ZOOM to select
it. The Cameras menu
appears on screen.
Continues on back...
Advertisement
Related Manuals for Project Nursery PNMC01
Summary of Contents for Project Nursery PNMC01
-
Page 1: Quick Start Guide
The camera turns on automatically when it’s plugged in (the indicator PNMC01 QSG 01 light on the base below the camera lens turns blue). Unpack Make sure the monitor you want to pair this camera with is turned on. - Page 2 Pair the camera with your monitor(s) Position the camera (continued) Place the camera on a flat surface, like a dresser or shelf, or mount the camera to a wall using the keyhole slots on its bottom. Then plug it in using the charging cable and In the Cameras menu, power adapter.
Need help?
Do you have a question about the PNMC01 and is the answer not in the manual?
Questions and answers