Extech Instruments AN10 User Manual page 2

Introduction
Congratulations on your purchase of the Extech Anemometer the AN10. This device measures air
velocity via the attached mini‐vane sensor in units of m/s, fpm, mph, kph, and knots. The large,
easy‐to‐read backlit LCD displays measurement readings and status indicators. This device is
shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Please visit our website (www.extech.com) to check for the latest version of this User Guide,
Product Updates, and Customer Support.
Safety

The probe extending from the top of the meter houses the sensitive air velocity vane sensor,
do not mishandle, shock, or allow liquids to come into contact with it.

The probe sensor can cause personal injury if it is misused or mishandled. Use caution when
handling this device.

Do not allow children to handle this device or the accessories and packing materials supplied
with it.

The meter uses a 9V battery (installed in the rear battery compartment). Please remove the
battery from the meter if the meter is not to be used for a long period of time. Spent
batteries that remain in the meter could potentially leak and cause damage to the meter.
Shop for Extech products at:
2
ShopExtech
AN10-en-GB_V1.1 4/15
1.800.561.8187
.ca